OBDKey Product Range :: OBDKey WLAN

Vital Statistics

OBDKey WLAN  is a vehicle interface providing a WiFi / Wireless Lan / WLAN radio interface for devices that have a WiFi compatible system.

Software supplied with the OBDKey WLAN unit will work with Windows PC's and Windows Mobile devices which support a wireless LAN interface. Third party software is available for Apple iPhones and iPod Touch devices.

This is the same software as supplied with the OBDKey Bluetooth and OBDKey USB devices.

Windows Mobile (PDA) Software Supplied		Windows PC Software Supplied	Windows Mobile (Smartphone) Software Supplied

iPhone and iPod Touch Support

For iPhone and iPod Touch support, we have tested successfully with the DevToaster Rev software product.  OBDKey WLAN will work without modification with the DevToaster Rev.

Note that the DevToaster Rev software must be purchased seperately via the Apple AppStore.

iPod Wi-Fi Configuration	Engine Codes Detected Using the DevToaster iPod Rev Application (application not supplied - must be bought seperately)

Product Vehicle Interface Features

• Works on all OBD-II Compliant Vehicles

• Compatible with the EOBD and OBD-II standards

• Read and Clear Engine Fault Codes

• Supports OBD-II and EOBD Modes 1 to 9

• Supports OBD-II and EOBD Modes extended modes (e.g. ISO 14229 and ISO 14230)

• Read and Display Live Engine Data

• Multi - Protocol Interface

• Supports OBD-II standard ISO9141

• Supports OBD-II standard KWP2000

• Supports vehicle (VW / Audi) protocol KW1281

• Supports OBD-II standard SAE J1850 VPWM and PWM

• Supports OBD-II standard CAN Bus (and J1939)

• Supports OBD multiple responses from multiple ECUs

• Suitable for both Professionals and DIY / Enthusiasts

Specifications

Unit dimensions: 62x45x24mm (65x45x24mm including accessory loop)
Port: 16-pin OBD-II Standard Socket
Vehicle Support: All OBD-II Vehicles (including CAN bus)
WiFi: The OBDKey WiFi connects with any 802.11b/g wireless network and can connect to another WiFi module, laptop, notebook and any 802.11b/g compatible device.
WiFi: Supplied with IP address, port number and SSID for simple configuration as an ad-hoc network.  Infracstucture (via an access point) mode is also supported.
WiFi: Secure Encryption Supported: WPA-PSK, WPA-TKIP, WEP-128, WEP-64
WiFi: Built-in antenna. 2.412 to 2.472 GHz “WiFi?ISM band. Channels: 1-11 USA, 1-13 Europe. FCC Certified for Immediate Deployment. 802.11gb Modular Certified by U.S.A. FCC. Modular Certification
External power: 8.0 to 32.0 volts provided by vehicle battery via OBD-II socket
Radio Operating Range : Open Environment: 300 metres / 1000 feet
Radio Operating Range : Workshop Environment: 25 to 100 metres / 75 to 300 feet
Mechanical Add-Ons: There are no "bolt-on" parts. The OBDKey WiFi is a single self-contained unit.
Cables: There are no cables at all. The OBDKey WiFi is a single self-contained unit which plugs directly into the vehicles J1962 OBD-II port connector.
Support : On line, via email
Warranty : Two Years from receipt of product

OBDKey WLAN Installation Diagram

Wireless LAN Specifications

IEEE 802.11 g b Wireless LAN
2.4GHz WLAN
Secure Encryption available (default none but WEP, WPA and WPA2 - user configurable)
Internet Protocols: TCP, IP
Frequency Band: 2.412 to 2.472 GHz “WiFi?ISM band
Channels: 1-11 USA, 1-13 Europe  (user configurable)
Supports ad-hoc Wireless LAN networks (default)
Supports infrastructure Wireless LAN networks (user configurable)
User configurable IP address
Interface for user configuration
 

Exclusive OBDKey Features

Extended command set so that OBDKey can perform enhanced diagnostics not possible with simple ELM based scan tools. However, OBDKey is compatible with the legacy ELM327 command set which means you can also run ELM based applications with the OBDKey device range.
Upgradeable firmware. Updates available to add new features to the already stable and well proven OBDKey core firmware. Keeping your OBDKey adapter up to date and protecting your investment.
Battery saving technology which prevents the OBDKey from keeping the vehicle ECU systems awake for longer than is really needed. Regular battery checks should be carried out if you leave any device permanently connected to your vehicle.
Super advanced multi-protocol auto-detect processes. Further custom protocol support also available. OBDKey connects to more OBD-II and pre-OBDII vehicles than any other scan tool adapter on the market in this class.
Stable connection to all supported vehicles
Large and reliable enhanced protocol memory buffer. Faultless and error free data acquisition guaranteed from OBDKey

The OBDKey WLAN is capable of working in ad-hoc and infrastructure (via an access point) modes.  In ad-hoc mode the OBDKey WLAN will create a wireless LAN network with a new SSID for other devices to detect and connect to.

Join our mailing list, so you get the latest news, quickest. info@obdkey.com

Copyright ? 2012. {Copyright notice}