Thread: 360BHP RB20 set-up. Will sell whole/break/swap for SR gear

I am kind of gauging interest on this as I am considering fitting a SR in my R32.

Now if someone is interested I could sell the whole lot as a kit ready to drop in and have a fully badass 360 odd bhp RB20 set-up.

Also as I am looking at doing a SR swap I will be happy to swap like for like on SR parts, engine, ecu, Uprated turbo etc.

What I have:

RB20DET engine, very good condtion uses no oil or water, head has recently been rebuilt, has a metal head gasket fitted. Can be supplied with all ancillaries.

€500

RB20DET Gearbox, Good condtion no noises or crunches.

€200

Toda racing Lightweight flywheel, just recently skimmed in perfect condtion. VERY light!

€200

Exeddy Paddle Clutch, Plenty of life left in it, good bite and never slipped on me.

€200

Standard RB20DET Turbo, in good condtion, boosted fine and as said before car never used any oil.

€150

XS Power one piece stainless elbow and downpipe.

€120

6x GTR injectors, had these cleaned and flow tested before I fitted them about 5k ago, work perfectly.

€300

GTR resistor pack to work with GTR injectors, I bought this brand new from RHD Japan 5k ago.

€60

HKS GT2535 Turbo, quite rare as it is a direct RB fitment to fit RB20/25 and is a pretty decent size. I have just has this rebuilt as it failed on me. I had it rebuilt by AET Turbos at a cost of £700, they had to mill out the front housing and fitted a slightly bigger wheel off a 2871r I also had WRC spec metal bearing case fitted. It is brand new and has never been fitted. I belive it is good for about 360bhp on a RB20 and a bit more on a RB25.

€1000

Nistune RB20DET ECU, currently mapped for a Z32, GTR injectors and a standard turbo running 0.85/1 bar.

€300